Please note that the screens shown may differ depending on your usage environment and conditions. Microsoft and Windows are trademarks of Microsoft Corporation in the United States and other countries.
Other company and product names may be registered trademarks or trademarks of others. This document uses the following abbreviations. Notes : 1. Windows is not supported though installation of this product is possible.
For how to uninstall the printer driver, refer to Section 2. Failure to do so may cause unstable printing operations due to the influences of the files and registry related to the old version remaining in the system.
Follow the procedure in Section 2. The status monitor has been disabled as default. Wrong setting disables proper printing. Doing so reduces the load on the printer driver and increases the print efficiency. When RSC Serial interface is used for connection, it will take time until printing starts. It is recommended to use other interfaces as far as possible.
For details of the printer parameter setting, refer to Section 6. Also, when multiple computers connect to the same printer, specify that printer as the shared printer or disable the [Printer Status Monitoring.
Be sure to change this setting when you print Kanji characters as bar code data, otherwise an error results. When using bar code fonts like QR code and if you want to specify a function character as bar code data, you need to specify two function characters consecutively. Print the label format, and check and adjust the label format. They are the stock IDs unique to this product. The following table shows the stock IDs for the standard stock types registered to the printer driver.
When a new stock type is additionally registered, an ID will be assigned in the order of registration, starting from The stock ID can be changed on the Edit Stock screen. Use these IDs when specifying or checking a stock size of dmPaperSize. The IDs for the standard stock types have been totally changed from Version 7. Therefore, when printing is performed from the application which manages the stock types for Excel, Access, etc.
In this case, change the stock IDs back to the former ones using the following procedure. User-added stocks are imported with their original IDs.
So, select the standard stock type, click on the [New], and save it as a new stock assigning the former ID listed the table on the left. The stock list is sorted by ascending order of stock name Symbol, number, alphabet, Kana, and Kanji , regardless of the stock ID.
After importing the preset settings, check the settings. In this case, change the port configuration with administrative privilege. If you installed any by mistake, uninstall the all printer drivers by the DriverWizard, then reinstall this product only. When this checkbox is checked, every data specifying the same font will be incorporated into one bar code.
If you want to print more than one bar code of the same font with this feature enabled, register required number of bar code fonts. Multiple data with the same Y-coordinate and same bar code font specified are all connected. It is possible to save the setup information by temporarily enabling the bi-directional support after changing the printer name. In that case, click the [Allow]. If you uninstall the printer driver, set up the Windows again.
This should be also conducted when the installation does not succeed. Note : Log on as the user with administrative privilege. When the screen on the right appears, click the [Install] button. If an undefined device is created after a plug-and-play installation, follow the procedure below. The installation procedure of this printer driver differs depending on the printer models and the connection methods. Page 34 2. In a same manner, press the Cont. Page 35 2. Page 36 2. Check function at the power on time.
Page 37 2. Page 38 2. Page 39 2. Page Dump Mode Setting 2. In the Dump Mode, data in the receive buffer are printed. Data are expressed in hexadecimal values. Page Receive Buffer Size 2. Page Basic Expansion Mode 2. Page Automatic Calibration 2. In the Automatic Calibration Mode, whether to activate the automatic calibration at a power on time or not is selectable.
Page Lan Setting 2. Page Real Time Clock Setting 2. Page 46 2. Page Installing The Printer Drivers 2. Page Installing The Printer Driver 2. Installing the Printer Driver The installation procedure differs depending on the interface connected to the printer and the operation system you are using.
Please install the printer driver by performing the appropriate procedure. If the previous version of the printer driver has been installed on your host computer , be sure to uninstall it before you install this printer driver. Page 50 2. If you install the printer driver for the first time, this screen is not displayed.
Page 52 2. Page 53 2. Page 54 2. Page 55 2. Page 56 2. Page 57 2. Click on the [Finish] button. Page 58 2. Page 59 2. Page 60 2. Page Uninstalling The Printer Driver 2. Uninstalling the Printer Driver NOTE: Before uninstalling the printer driver, be sure to complete all of printing, the status monitor, and properties settings. Page 63 2. Page Cautions 2. Page Using The Printer Driver 2. Open the Properties screen of the Printer Driver. Clicking on the About tab causes the following screen to appear.
Page Print Test 2. Perform a print test by using the Printer Driver or an Issue Command. Page 67 2. When using an optional Cutter Module It is necessary to set the issue mode, cut position, etc. Tone Fine When a fine adjustment is required, such as print start position, print tone, Adjustment etc, follow the procedure below. Page 69 2. Page 70 2. Page 71 2. Page 72 2. Page 73 2. Page 74 2. Page Threshold Setting 2. When the media is pre-printed, the darker or more dense inks can interfere with this process causing paper jam errors.
Page 76 2. If a paper jam error still occurs even after an automatic threshold setting has been performed, manually set the threshold voltage. To make a threshold value manually set in this section effective, select the Transmissive Sensor when using manual threshold value or Reflective Sensor when using manual threshold value within software commands or the printer driver.
Open Cookie Consent. Reviews Ask a question. Add To Wishlist. BT Barcode Label Printer, dpi. SKU: AA Ordered on request Stock availability enquiry. We currently have no stock information available. Please contact us for a lead time. Bulk pricing enquiry. View Details. SKU: DA Mfr Part BAW3. Ribbon quality: Wax. Brand: Toshiba TEC. Mfr Part BSW1. Rolls per box: 10 Size: mm x m. Mfr Part BAG3. For the B printer. Delivery within 2 — 5 working days. Mfr Part BAS1.
Ribbon quality: Resin. Brand: The Barcode Warehouse. Formulated solution suitable for most rubber and plastics pack of Toshiba Platen Roll Cleaner ml.
0コメント